Measurement (U.S. Customary Units)
Direct Transmission Density
(6" / 15 cm)
15 sec
1 min
4 min
Precision at 120 pcf
±0.42 pcf
±0.21 pcf
±0.11 pcf
Composition error at 120 pcf
±1.25 pcf
±1.25 pcf
±1.25 pcf
Surface error (0.05", 100% Void)
-1.06 pcf
-1.06 pcf
-1.06 pcf
Backscatter (98%) (4" / 10 cm)
15 sec
1 min
4 min
Precision at 120 pcf
±1.00 pcf
±0.50 pcf
±0.25 pcf
Composition error at 120 pcf
±2.50 pcf
±2.50 pcf
±2.50 pcf
Surface error (0.05", 100% Void)
-4.7 pcf
-4.7 pcf
-4.7 pcf
Moisture at 15 pcf
15 sec
1 min
4 min
Precision at 15 pcf
±0.64 pcf
±0.32 pcf
±0.16 pcf

Surface error (0.05", 100% Void)
Depth of measurement @
15 pcf = 8.5"

-1.12 pcf
-1.12 pcf
-1.12 pcf
Measurement (S.I. Units)
Direct Transmission Density
(15 cm)
15 sec
1 min
4 min
Precision at 2000 kg/m3
±6.8 kg/m3
±3.4 kg/m3
±1.7 kg/m3
Composition error at 2000 kg/m3
±20.0 kg/m3
±20.0 kg/m3
±20.0 kg/m3
Surface error (1.25mm, 100% Void)
-17.0 kg/m3
-17.0 kg/m3
-17.0 kg/m3
Backscatter (98%) (10 cm)
15 sec
1 min
4 min
Precision at 2000 kg/m3
±16.0 kg/m3
±8.0 kg/m3
±4.0 kg/m3
Composition error at 2000 kg/m3
±40.0 kg/m3
±40.0 kg/m3
±40.0 kg/m3
Surface error (1.25mm, 100% Void)
-75.0 kg/m3
-75.0 kg/m3
-75.0 kg/m3
Moisture
15 sec
1 min
4 min
Precision at 250 kg/m3
±10.3 kg/m3
±5.1 kg/m3
±2.5 kg/m3

Surface error (1.25mm, 100% Void)
Depth of measurement @
250 kg/m3 = 21.25 cm

-18.0 kg/m3
-18.0 kg/m3
-18.0 kg/m3
Radiological
Gamma Source 0.30 GBq (8 mCi) ±10% Cs-137
Neutron Source

1.48 GBq (40 mCi) ±10% Am-241:Be

Source Housing Stainless Steel Encapsulation
Shielding
Tungsten, lead, and cadmium
Surface Dose Rate (5 cm)
19 mrem/hr max., neutron and gamma
Source Rod Material
Stainless Steel
Shipping Case
DOT 7A, Type A, Yellow II label,
TI = 0.3
Sealed Source Approved for
Domestic and International
Shipments
Special Form
Electrical
Main Power Source 5 C NiMH (Rechargeable Pack)
Backup Power Source

5 AA Alkaline Batteries

Stored Power 4 ampere hours
Battery Recharge Time
3 hours maximum (automatic cutoff)
Charger
110/220 V ac, 50-60 Hz or
12-14 V dc
Current Consumption (Average)
35 mA
Power Consumption after Automatic Shutdown
0.0
Time before Automatic Shutdown
5 hours of inactivity
Readout
4 x 20 alpha-numeric liquid crystal display
Notes:
Battery packs are fully protected against overcharge and over-discharge. Charge life is updated every 1.9 seconds and is indicated under the SETUP menu. Full NiMH recharge shall be made within 3 hours by means of a 110/220 V ac, 50-60 Hz charger. Recharging shall also be accomplished by a 12-14 V dc charger.

A fully charged battery will remain operational for approximately 3 weeks (of standard use) without the GPS option (available only on the Model 3440 Plus) or use of backlight options. These options will reduce the battery life when utilized. The alkaline backup batteries will add an additional 1.5 weeks when the GPS and backlight features are not operating.

The gauge can store up to 999 test readings for later recall or downloading to a printer or computer. The Model 3440 Plus gauge also allows for data transfer via a USB port utilizing a USB printer or a removable drive. A list of compatible USB devices is available here.
Mechanical
Case High Impact Plastic
29.35 L x 13.88 W x 16.85 T in.
Operating Temp: Ambient: 32 to 158 °F (0 to 70 °C)
Surface: 350 °F (175 °C) for 15 minutes
Storage Temp. -70 to 185 °F (-55 to 85 °C)
Humidity 98%, noncondensing
Gauge Size (Including Handles):
12" Source Rod 23.5 x 9 x 14.5 in.
(597 x 229 x 368 mm)
8 " Source Rod 19.5 x 9 x 14.5 in.
(495 x 229 x 368 mm)
Weight 29 lbs. (13.1 kg)
Shipping Weight 85 lbs. (38.5 kg) w/case
Products» Field Equipment» Surface Gauges»
Model 3430 Plus & 3440 Plus: Specifications

Model 3430 Plus & 3440 Plus
Specifications