| Measurement |
Sample Geometry |
Cylindrical samples with parallel flat faces. Samples
produced using Gyratory Compactor or Marshall Hammer method meets
this geometry. For field samples obtained from coring, saw-cut
the bottom to form a flat face that is parallel to the top face. |
Sample Diameter |
100 mm (4 in.) and 150 mm (6 in.) |
Sample Height |
22.0 to 175.0 mm (0.87 to 6.89 in.) |
Tolerance of Cylinder Height |
For a field sample, the height should be determined from the
average of six evenly spaced height measurements with a precision
of 0.1 mm at sigma level. |
 |
| Electrical |
Power requirements: |
| Power Supply
|
100-240 V ac, 47-63 Hz |
(AC Adapter) |
Single phase, 0.4 A |
CoreReader |
12 V dc, 500 mA |
Serial Port: |
Connector |
9-pin male D-subminiature connector RS-232 standard |
Data format |
8 data bits, 1 stop bit, no parity |
Baud rate |
9600 |
Cable type |
RS-232 null modem, 9-pin female - 9 (25) pin female |
|
| Mechanical |
Size |
30.8 W x 41.2 D x 73.8 H cm
(12.2 W x 16.2 D x 29.0 H in.) |
| Weight |
35 kg (77 lbs.) |
| Shipping Weight w/accessories |
44.5 kg (98 lbs.) |
| Shipping Weight w/calibration cylinders |
11.3 kg (25 lbs.) |
| Ambient Operating Temp. |
5 to 40°C (41 to 104°F) |
